Table of Contents
Advertisement
DIR-615 Wireless N300 Router
User Manual
Bandwidth Control
On the Functions / Advanced / Bandwidth Control page, you can setup the rate limit for
traffic transmitted from every port of the router.
Figure 117. The Functions / Advanced / Bandwidth Control page.
By default, the rate is not limited. If you want to limit the rate for traffic transmitted from a port,
select the line corresponding to this port.
In the opened window, move the Enable switch to the right and enter the maximum value of the
transmitted traffic rate for this port in the Maximum rate field. Then click the SAVE button.
If you want to remove the rate limit for this port, move the Enable switch to the left and click the
SAVE button.
Figure 118. The window for setting up rate limit.
Page 141 of 176
Configuring via Web-based Interface
Advertisement
Table of Contents
