Installing The Optional Speaker/ Microphone - Kenwood NX-300-K Instruction Manual

NX-300-K, NX-300-K3, TK-5320-K, TK-5320-K3
FCC ID: ALH378500
Installing the Cap over the Speaker/Microphone Jacks
If you are not using an optional KMC-25 speaker/ microphone, install the cover over the univeral connector using the
supplied 4 x 6 mm screw.

Installing the Optional Speaker/ Microphone

1 Insert the guide of the speaker/ microphone connector into the groove of the universalconnector.
2 Secure the connecter in place using the attached screw.