KENWOOD CORPORATION
Installing the Cap over the Speaker/Microphone Jacks
If you are not using an optional speaker/ microphone, install the cap over the SP/MIC jacks using the supplied screw.
Note:
To keep the transceiver water resistant, you must cover the SP/MIC jacks with the cap or the cap or the speaker/microphone connector.
Installing the Optional Speaker/ Microphone
1 Insert the speaker/ microphone plugs into the SP/MIC jacks.
2 Install the speaker/microphone locking Holder over the plugs using the supplied screw.
TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110
TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110
TK-3212-2 FCCID: ALH37693120