Installing The Optional Speaker/ Microphone - Kenwood TK-2170-K Instruction Manual

KENWOOD CORPORATION
TK-2170-K, TK-2170-K2 FCC ID:ALH34703110 / IC:282D-34703110
TK-3170-K, TK-3170-K4, TK-3173-K FCC ID:ALH34713110 / IC:282D-34713110
TK-3170-K3, TK-3170-K6 FCC ID:ALH34713130 / IC:282D-34713130
Installing the Cap over the Speaker/Microphone Jacks
If you are not using an optional speaker/ microphone, install the cap over the SP/MIC jacks.
Note:
To keep the transceiver water resistant, you must cover the SP/MIC jacks with the cap or the speaker/microphone
connector.

Installing the Optional Speaker/ Microphone

1 Insert the guide of the speaker/ microphone plugs into the SP/MIC jacks.
2 Insert the speaker/microphone locking Hardware Fixture over the plugs and slide down to lock.