Installing The Optional Speaker/ Microphone - Kenwood TK-2302-1 Instruction Manual

TK-2302-1, TK-2302V-1 FCC ID:ALH413500 IC:282D-413500
TK-3302-1, TK-3302U-1 FCC ID:ALH413600 IC:282D-413600
Installing the Cap over the Speaker/Microphone Jacks
If you are not using an optional speaker/ microphone, install the cap over the SP/MIC jacks using the supplied screw.
Note:
To keep the transceiver water resistant, you must cover the SP/MIC jacks with the cap or the cap or the speaker/microphone connector.

Installing the Optional Speaker/ Microphone

1 Insert the speaker/ microphone plugs into the SP/MIC jacks.
2 Install the speaker/microphone locking Holder over the plugs using the supplied screw.