Time Stretch - Yamaha RS7000 Owner's Manual

4. The Sample Jobs
OK
8
......................................................................................[F3]
Saves the normalized sample to the specified destination key
number.

06 TIME STRETCH

Changes the length of the sample without changing the pitch.
The sound quality of some samples may change.
1 2
[Knob 1] [Knob 2]
SAMPLE (Sample Number)
1
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be time-stretched.
KEY (Key Number)
2
[Settings] C-2 ~ G8
Specifies the key number of the sample to be time-stretched.
NOTE
This parameter is not available when the speci-
fied sample is a Pitched Voice.
RATIO
3
......................................................................[Knob 3]
[Settings] 25 ~ 400%
Specifies the length of post-process sample as a ratio of the
length of the original sample (100%).
ACCURACY
4
...........................................................[Knob 4]
[Settings] SOUND 4 ~ SOUND 1, NORMAL,
RHYTHM 1 ~ RHYTHM 4
SOUND 4 ~ SOUND 1
........ These settings place emphasis on
NORMAL .......... Produces an optimum balance of
RHYTHM 1 ~ RHYTHM 4
........ These settings place emphasis on
Specifies whether the sound quality or rhythmic feel of the
time-stretched sample will be emphasized.
248 RS7000
5 7
3 4
[F2] [F3]
[Knob 3] [Knob 4]
...........................[Knob 1]
............................................[Knob 2]
sound quality, with the "SOUND 4"
setting producing the highest sound
quality.
sound quality and rhythmic feel.
rhythmic feel, with the "RHYTHM 4"
setting producing the most accurate
rhythmic feel.
AUDITION
5
Plays the specified sample.
Plays the time-stretched sample if pressed after [F4] (DO!) is
pressed to stretch the sample.
DO!
6
................................................................................... [F4]
Executes the job.
7 CREATE
......................................................................... [F3]
Saves the processed sample to the target sample number,
overwriting the original sample. If the original sample is a
Pitched Sample it will be overwritten at this point.
If the original sample is part of a Sample Kit Voice a key-
number selection page will appear.
6
[F4]
8 CREATE TO
(Destination Key Number)
[Settings] C-2 ~ G8
Specifies the key number to which the processed sample will
be saved.
OK
9
..................................................................................... [F3]
Saves the time-stretched sample to the specified destination
key number.
07 PITCH CONVERT
Changes the pitch of the sample without changing the length.
The sound quality of some samples may change.
1
[Knob 1]
SAMPLE (Sample Number)
1
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be pitch converted.
...................................................................... [F2]
8 9
[F3]
[Knob 2]
........................... [Knob 2]
5 7
2 3
[F2] [F3]
[Knob 2] [Knob 3] [Knob 4]
.......................... [Knob 1]
6
4
[F4]