Multifunctional Settings; Using The Menu Functions - ViewSonic PJ510 User Manual

Multifunctional Settings

Using The Menu Functions

This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO,
SCREEN and OPTION. Each of these menus is operated using the same methods. The basic
operations of these menus are as follows.
Press the MENU button.
1
The menu display appears on the screen.
Use the ( ), ( ) buttons to select a menu, then press the ( ) or ENTER button.
2
The display of the selected menu appears.
Use the ( ), ( ) buttons to select an item, then press the ( ) or ENTER button.
3
The operation display of the selected item appears.
When you adjust a numerical value, you can use the single menu (small display showing only the
operation display area). Press the ( ) or ENTER button again to switch to the single menu.
Use the ( ), ( ) buttons to operate the item.
4
When you want to reset the adjustment, press the RESET button during the operation. Note that
the items whose functions are performed simultaneously with operating (ex. LANGUAGE,
WHISPER, H PHASE etc.) are not reset.
When you want to return to the previous display, press the ( ) or ESC button.
[ex. Adjusting VOLUME]
1. Press the MENU button
2. Use the ( ), ( ) buttons to select the OPTION, then press the ( ) or ENTER button.
3. Use the ( ), ( ) buttons to select the VOLUME, then press the ( ) or ENTER button.
4. Use the ( ), ( ) buttons to adjust the VOLUME.
5. Press the MENU button to exit.
21 ViewSonic PJ510