Screen Menu - ViewSonic PJ510 User Manual

SCREEN Menu

With the SCREEN menu, the items shown in the Table below can be
performed. Perform each operation in accordance with the instructions in the
table below.
Item
BLANK Select a Blank Screen Color:
BLUE ( )
• The blank screen of selected color is displayed by pressing the BLANK button. Please refer to the
section "Temporarily Blanking The Screen" of "Operation" about the screen blanking.
START UP Select the Start Up Screen:
TURN ON ( )
• If the TURN OFF is selected when there is no signal or the detected signal is out of specifications,
the blank screen is displayed.
MENU POSITION Adjust a Menu Position:
Pressing the ( ) or ENTER button start adjusting,
Left ( )
• The ( ) button does not finish this item. When you want to return to the previous display, please
press the ESC button.
MESSAGE Select the Message Mode:
TURN ON ( )
• When the TURN OFF is selected, the following message functions are disabled:
The message of "AUTO IN PROGRES"
The message of "NO INPUT IS DETECTED"
The message of "SYNC IS OUT OF RANGE"
The message while being searched for an input signal, "Searching ....."
The message when an input signal is detected, "Detecting ....."
The indication of the input signal by input change.
RESET Reset the SCREEN Menu Items:
Selecting the EXECUTE performs this function.
EXECUTE ( )
• The items of the SCREEN menu are collectively returned to the initial setting..
( ) WHITE ( ) (
)
( ) TURN OFF
Up
( )
( ) Right
( )
Down
( ) TURN OFF
CANCEL
Description
BLACK
ViewSonic PJ510 28