Table of Contents
Advertisement
Assembly Steps
STEP 1 – Prepare Pads
Put the jack into the bottom left side of the
main unit.
Note: Do not turn the unit on, until pads are
on your skin.
STEP 2 – Place Gels onto the Pads
• Remove the gels from the sealed plastic
bag.
Note: Each gel has a film on each side of
the gel. One film is blank (without
text) the other side has text ("SKIN").
• Remove the blank plastic
film.
• Place the gels onto the black
side of the pads.
Note: Make sure the gel lays evenly and
securely with no bubbles, bending or
missing pieces.
14
Blank Plastic Film
EN
Gel
Gel
Pad
Advertisement
Table of Contents
