Table of Contents
Advertisement
4-8. Setup – Storage Mode
In the Setup menu, select the Storage tab. Then, the Storage menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control.
Item
Overwrite
When enabled, the DVR will continue recording and overwrite the oldest existing
recorded data once the hard drive is full. When disabled, recording will stop once the hard
drive is full.
User will have an option of "Yes" or "No" for formatting the Hard Drive.
Disk Format
After formatting HDD, the DVR will reboot.
Caution: It is recommended to archive any data that you may need in the future
before formatting the hard drive.
Disk Info
Hard drive information. Displays the following information;
Recording
Enable/disable recording limit.
Limit
Recording
Set the recording limit days. (1- 90 days)
Limit Days
If the Recording Limit Days are set to 1, the data will be overwritten after 24 hours.
Figure 4.8. Storage Setup Screen
Table 4.8. Menu Items in Storage Setup Screen
Description
50
Advertisement
Table of Contents
