Setup - Storage Mode - Speco D8HS User Manual

ADMIN, USER1, USER2, USER3:
Selected Checkbox: The user can access the function.
Blank Checkbox: The user can not access the function.
USER NAME Change the name of USER1, USER2 and USER3.
SETUP
PASSWORD Options are ADMIN, USER1, USER2 and USER3.
SETUP Select USER PASSWORD using the mouse or the remote control and press SEL
button. Select user type and enter the current password. And, enter a new password,
enter the same password again to confirm and select OK. Then the message
"PASSWORD CHANGED" is displayed.
The factory default password is 1111.
It is highly recommended to assign a new password to protect the system.
AUTHORITY Set authority level of playback on each user.
OF PLAYBACK Checked box: authorized to playback. Blank check box: no authority.
REMOTE Disconnect the remote playback after the specific time (Disable, 5min, 10min, 15 min,
PLAYBACK 30min, 60min.
TIMEOUT
4-8. Setup – STORAGE Mode
In the SETUP menu, select the STORAGE tab. Then, the STORAGE menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control.
 Click "ENTER" after naming.
Figure 4.8. STORAGE Setup Screen
48