Speco D16HT User Manual page 84


CHANNEL: Select the Channel to configure audio input
o
AUDIO SOURCE: Local Audio (RCA) or IP CAM Audio

KEYTONE: Sets On or Off of Key Tone.

REMOTE CONTROLLER ID: Sets an ID number of which remote control to receive commands.

SENSOR: Select the type of sensor.
7-7-5. Display
Select the DISPLAY tab to set the DISPLAY conditions.
These settings apply to all channels.

OSD: Sets whether to display or not date and time as well as channel number on the screen.

OSD CONTRAST: Adjust the character contrast on the screen.

MAIN MONITOR SEQUENCE: Setting for automatically switching the displayed video.

SEQUENCE DWELL TIME: Sets the interval for automatically switching the screens.

SITE: Name, Covert, Brightness, Contrast, Hue, Saturation
These settings apply to the specified channel only.
7-7-6. Network
84