Speco D16HT User Manual page 44

Item
Network Type
IP
Subnet Mask
Gateway
DNS (Primary)
DNS (Secondary)
DDNS
Network Video Port
Network Audio Port
Web Port
Network Stream
Wireless LAN
Push Event
Table 4.6. Menu Items in Network Setup Screen
DHCP: DVR will automatically retrieve an IP address.
Static: Network information must be manually configured.
Enter IP address that is assigned for the DVR
Enter Subnet Mask that is assigned for the DVR
Enter Gateway that is assigned for the DVR.
Enter Primary DNS address that is assigned for the DVR
Enter Secondary DNS address assigned for the DVR
Dynamic Domain Name System (DDNS) allows a DNS name to be
constantly synchronized with a dynamic IP address. In other words, it
allows using a dynamic IP address to be associated with a static
domain name so others can connect to it by the static name.
Enable/disable using domain name address through DDNS server.
Enter the port number. (Default 5445)
Display the network audio port (Network Port + 1).
Enter the port number for connection using web.
(Default web port : 80, Default https port : 443)
Sets the camera display settings for network streaming.
1. Connect USB WIFI Dongle to USB connector on DVR.
2. Load the application on your smart phone or PC and enter the WIFI
IP Address.
3. Find the WIFI SSID and enter the password. (Image is below.)
4. Then, the remote viewing and configuration can be used.
* There is a distance limitation for the Wireless LAN.
Set Phone ID and check Notification function to receive an event
message from DVR.
Description
44