Speco D16HT User Manual page 35

Pre Record Enable/disable pre-event recording. Pre-event recording is limited to 20 minutes.
Pre Event Set the post event recording time duration for the specified channel.
Record (10~60 seconds)
Audio Enable/disable audio recording for the specified channel.
Schedule To setup a recording schedule, select Schedule in the Record menu. Navigate
through the menu items or change the settings using the mouse or the remote control.
Select Channel > select 'none', 'continuous', 'motion' or 'sensor' > Highlight area
To copy a schedule to a different channel, select the channel from the Copy Schedule
menu.
clear : Clears the schedule
Figure 4.3.2. Schedule Recording Setup Screen

none: Disable recording during selected timeframe (Highlighted in White)

continuous: Continuous recording (Highlighted in Green)

motion: Motion recording (Highlighted in Yellow)

sensor: Sensor recording (Highlighted in Red)
35