Lexmark B2865dw User Manual page 52

Understanding the printer menus
Device
Preferences
Menu item
Display Language
[List of languages]
Country/Region
[List of countries or regions]
Run initial setup
Off*
On
Keyboard
Keyboard Type
[List of languages]
Displayed information
Display Text 1 [IP Address*]
Display Text 2 [Date/Time*]
Custom Text 1
Custom Text 2
Date and Time
Configure
Current Date and Time
Manually Set Date and Time
Date Format [MM‑DD‑YYYY*]
Time Format [12 hour A.M./P.M.*]
Time Zone [GMT*]
Date and Time
Network Time Protocol
Enable NTP [On*]
NTP Server
Enable Authentication
Paper Sizes
U.S.*
Metric
Screen Brightness
20–100% (100*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the language of the text that appears on the display.
Identify the country or region where the printer is configured
to operate.
Run the setup wizard.
Select a language as a keyboard type.
Notes:
•
All the Keyboard Type values may not appear or may
require special hardware to appear.
•
This menu item appears only in some printer models.
Specify the information to appear on the home screen.
Note: Custom Text 1 and Custom Text 2 appear only in some
printer models.
Configure the printer date and time.
Configure the settings for Network Time Protocol (NTP).
Notes:
•
Enable Authentication appears only in some printer
models.
•
When Enable Authentication is set to MD5 key, Key ID
and Password appear.
Specify the unit of measurement for paper sizes.
Note: The country or region selected in the initial setup
wizard determines the initial paper size setting.
Adjust the brightness of the display.
Note: This menu item appears only in some printer models.
52