CDA Matrix MHN101FR User Manual page 8

Using your hob
To switch the hob on
• To switch the power on, touch and hold the "On/off sensor" (5)
for approximately two seconds. The hob will beep and all four
cooking zone indicators will show "0".
Please note: If a zone is not selected nor a power level set within ten
seconds, the hob will switch off automatically.
To set the power level
• Touch the cooking zone selector (9) for the required zone. The
hob will beep and the zone display will show a pulsating "0" on the
selected zone's indicator.
• Select the desired heat setting using the "+" or "-" selectors. The
power level ranges from 1 (minimum) to 9 (maximum). The hob will
begin heating and the cooking zone indicator will pulsate for
approximately ten seconds before remaining solidly lit. Inactive
cooking zones' indicators will dim at this point.
• This hob also has a "Keep warm" function as well as a "Booster"
function. The "Keep warm" function is available between "0" and
"1" heat settings and is shown on a cooking zone indicator as "
The Booster function is available after heat setting "9" and is
shown on a cooking zone indicator as "P".
Please note: After zone selection, the zone will remain active for
approximately ten seconds. If no key is touched during this time, the
zone will become inactive and the hob will switch off automatically.
8
".