Table of Contents
Advertisement
Setting up
Connections
R If you do not connect the telephone line cord
and use only mobile lines, set the mobile line
only mode to use this unit more conveniently
(page 18).
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Connect the telephone line cord to the unit
until you hear a click.
Fasten the AC adaptor cord and the telephone
line cord by hooking it.
Connect the AC adaptor to the power outlet.
Connect the telephone line cord to the unit,
then to the telephone line socket until you hear
a click.
A DSL/ADSL filter (not supplied)
if you have a DSL/ADSL service.
Connect the corded handset cord to the
corded handset and the base unit until you
hear a click.
*1 For Australia: Connect a DSL/ADSL filter
between the telephone plug and telephone
line cord.
*1
is required
Note:
R Use only the supplied Panasonic AC adaptor
PNLV226AL.
R Use only the supplied telephone line cord.
R Follow the directions on the display to set up
the unit.
n Charger
Handset battery installation
R USE ONLY rechargeable Ni-MH batteries AAA
(R03) size (
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
3
1
1
Connect the AC adaptor to the power outlet.
1
).
Getting Started
7
7
6
5
4
3
3
2
1
9
Advertisement
Table of Contents
