Table of Contents
Advertisement
Problem
I fully charged the batteries, but
–
still flashes,
–
is displayed, or
– the operating time seems to be
shorter.
Making/answering calls, intercom
Problem
is displayed.
Noise is heard, sound cuts in and
out.
The handset or base unit does
not ring.
I cannot make local calls with the
handset or base unit using a
mobile line.
I cannot make or answer mobile
calls with the handset or base
unit.
Cause/solution
R Clean the battery ends (
dry cloth and charge again.
R It is time to replace the batteries (page 9).
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit's AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 47).
R You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a
filter (contact your DSL/ADSL service provider) to the telephone
line between the base unit and the telephone line socket.
Contact your DSL/ADSL provider for details. (for Australia)
R If you use a DSL/ADSL (JetStream) service, we recommend
that you contact your DSL/ADSL service provider to have a DSL/
ADSL Splitter installed. We do not recommend the use of
generic DSL/ADSL filters. Contact your DSL/ADSL service
provider for details. (for New Zealand)
R The ringer volume for landline is turned off. Adjust the ringer
volume (page 21, 25, 41).
R The ringer volume for mobile line is turned off. Adjust the ringer
volume (page 21, 25, 39).
R The unit which is not selected to ring for mobile calls does not
ring. To change the selection, see page 17.
R Night mode is turned on. Turn it off (page 45).
R You need to add your area code when making mobile calls.
Store your area code in order to automatically add it to the
beginning of the 8-digit (for Australia)/7-digit (for New Zealand)
phone number when making mobile calls (page 19).
R Depending on the mobile phone's compatibility, you may not be
able to make or answer mobile calls even if the mobile phone is
connected to the base unit.
R Make sure that the MOBILE indicator lights up and the mobile
phone is connected to the base unit (page 18).
R Only 2 Bluetooth devices can be used with the unit at the same
time (for example, 2 mobile lines, or the headset and 1 mobile
line).
R The mobile phone is being used separately from your system.
Useful Information
,
) and the charge contacts with a
71
Advertisement
Table of Contents
