Yaesu FTDX101MP Operation Manual page 2

1 The scope "LEVEL" adjustment function has been added to the C.S (custom select) key.
2 When CW keying speed is 45 wpm or more, QSK DELAY TIME (time between keying and actual transmission) is
fixed to 15 msec.
3 When transmitting by the [MOX] key, modulation is input from the "MIC" or "REAR" jack according to the "MOD
SOURCE" setting of each mode.
To implement these changes, the C.S (Custom Select) function, and the setting menu have been changed as
shown below:
1 Changing the function of C.S (Custom Select)
By simply pressing the [C.S] key, the MPVD ring operates in the function that has been assigned to the [C.S]
key (see below) (default setting is MEM CH).
RF POWER Adjusts transmission output.
MONI LEVEL Adjusts the Monitor level.
DNR LEVEL DNR level adjustment.
NB LEVEL NB level adjustment.
VOX GAIN VOX gain adjustment.
VOX DELAY VOX delay adjustment.
ANTI VOX ANTI VOX adjustment.
STEP DIAL Frequency change at a predetermined frequency step.
MEM CH Selects the Desired memory channel.
GROUP Selects the memory group.
Pass band width selection of Roofing filter.
R.FIL
LEVEL Adjust the level of the 3DSS display.
How to assign functions to the MPVD ring
1. Press and hold the [C.S] key.
The function selection screen is displayed.
2. Touch the function you want to assign.
Functions can also be assigned in the setting menu (see below).
[OPERATION SETTING] → [GENERAL] → [CS DIAL]
Function: Sets the Operation of MPVD dial when the [C.S] key is pressed.
Available Values: RF POWER / MONI LVL / DNR LVL / NB LVL / VOX GAIN / VOX DELAY / ANTI VOX
Default Setting: MEM CH
Description:
RF POWER: Adjusts transmit output.
MONI LVL: Adjusts the Monitor volume.
DNR LVL: DNR level adjustment.
NB LVL: NB level adjustment.
VOX GAIN: VOX gain adjustment.
VOX DELAY: VOX delay adjustment.
ANTI VOX: ANTI VOX adjustment.
STEP DIAL: Set the Frequency Change Steps.
MEM CH: Selects the Memory Channels.
GROUP: Selects the Memory Group.
R.FIL: Selects the Roofing filter Pass Band Width.
LEVEL: Adjust the level of the 3DSS display.
Updated Functions
STEP DIAL / MEM CH / GROUP / R.FIL / LEVEL