Voice Memory; Recording Your Own Voice In Memory; Checking The Recording; Transmitting The Recorded Message - Yaesu FTDX101MP Operation Manual

Voice Memory

The Voice Memory capability of the FTDX101 may be used to store and replay often repeated messages.
The Voice Memory includes five memories, each capable of storing up to a maximum of 20 seconds of
voice audio.
The Voice Memory may be operated from the Display Panel, or from the optional FH-2 Remote Control
Keypad, which plugs into the rear panel REM jack.

• Recording Your Own Voice in Memory

1. Select the SSB or AM mode.
When using FH-2, go to step 4.
2. Press the [FUNC] key.
3. Touch [REC/PLAY].
4. Touch [MEM] on the display or press the
[MEM] key on the FH-2.
A blinking "REC" will appear in the display.
If a [1] through [5] key (see next step) is not
pressed within five seconds, the memory
storage process will be cancelled.
5. Touch [1] through [5] on the display or press
any of the FH-2 keys numbered [1] through [5]
to select that memory storage register.
6. Press the microphone PTT switch momen-
tarily. The "REC" icon will glow steadily and
recording will begin.
● Remember that the time limit for recording
any message is 20 seconds.
7. Touch [MEM] on the display or press the FH-2
[MEM] key to complete the message storage
process.
54

• Checking the Recording

1. Be sure that [BK-IN] function is "OFF" so
transmit will not be activated (the LED imbed-
ded in the [BK-IN] key must be Off).
When using FH-2, go to step 4.
2. Press the [FUNC] key.
3. Touch [REC/PLAY].
4. Touch [1] through [5] on the display or press
the FH-2 [1] through [5] key (whichever regis-
ter was just recorded in). The "MSG" icon will
appear in the display and the audio recorded
in the Voice Memory will be heard.
● To adjust the playback volume level, touch,
[RX LEVEL] and turn the [MULTI] knob.

• Transmitting the Recorded Message

1. Select the SSB, AM or FM mode.
Be sure the [BK-IN] functions is "ON" so
transmit will be activated (the LED imbedded
in the [BK-IN] key must be On).
When using FH-2, go to step 4.
2. Press the [FUNC] key.
3. Touch [REC/PLAY] .
4. Touch [1] through [5] on the display or press
the FH-2 [1] through [5] key (whichever
memory was recorded in). A "MSG" icon will
appear in the display and the message will be
transmitted.
● To adjust the output level during transmit,
touch [TX LEVEL] and turn the [MULTI]
knob.