7.
REMOVAL AND REPLACEMENT OF MEDIA
7. REMOVAL AND REPLACEMENT OF MEDIA
1. Open the printer cover and turn the head-up lever to the right.
2. Pull out the roll stopper and backing paper stopper, then remove the receipt/label core with the
backing paper.
anticlockwise:
Head-up Lever
3. Put a new receipt/label roll over the media shaft and fix it with the roll stopper.
You can loosen the backing paper by turning the paper winding shaft
Receipt/Label Core
Paper Winding Shaft
7- 1
7. REMOVAL AND REPLACEMENT OF MEDIA
Roll Stopper
Backing Paper Stopper
Backing Paper (Labels only)
Media Shaft
Receipt/Label
Roll Stopper