Honda HS1336iAS Owner's Manual page 58

OPERATION
MAIN SHIFT LEVER
DRIVE
CLUTCH
LEVER
AUGER CLUTCH SWITCH
56
5) Move the main shift lever fully to the
end of the forward slow speed range
slowly and clear the snow.
FAST
RANGE
• When the auger hits against the road
SLOW
or inclines to a side, adjust the auger
RANGE
housing position by operating the
auger housing control switch.
• When the snow is small in volume or
light in nature, move the main shift
lever to the high speed side. Perform
minor adjustment of the main shift
lever to stabilize the operating speed if
necessary.
6) When the drive clutch lever is released,
the auger clutch switch indicator (green)
goes off, both the auger and blower stop
turning, and the snow blower stops
moving.
Turn the auger clutch switch OFF if you
move the snow blower without
performing the snow blowing
operation.