5. Remove the fuel sediment cup, O-ring and filter.
6. Empty the contents into a suitable container. Clean the fuel sediment cup
and filter in nonflammable or high flash point solvent.
7. Reinstall the filter, new O-ring, and sediment cup.
• Install the filter by aligning with the groove on the carburetor side as
shown in the following illustration.
8. Tighten the sediment cup securely.
FILTER
O-RING
(Replace)
SEDIMENT
CUP
STORAGE
GROOVE
Align the filter with
the groove
FILTER
RIB
Align the filter with
the rib
FILTER
109