OPERATION
Auger Housing Tilt Angle (USA model only)
When the auger housing is tilted during snow removal, adjust the tilt angle by
operating the auger housing control switch.
To tilt the auger to the right: Move the switch toward the right.
To tilt the auger to the left: Move the switch toward the left.
LEFT
AUGER HOUSING
CONTROL SWITCH
• The control motor may overheat, which can cause a malfunction of the protector
circuit and motor and make the auger housing unadjustable.
• Stop operating the switch when the auger housing reaches the right end or left
end position. Do not continue to operate the auger housing control switch after it
has reached the desired position.
52
RIGHT
AUGER HOUSING
RIGHT
LEFT