Honda HS1336iAS Owner's Manual page 34

CONTROLS & FEATURES
AUGER HOUSING
CONTROL SWITCH
AUGER CLUTCH SWITCH
ON
OFF
ENGINE SWITCH
If you cannot change the initial position properly or if you want to return the
initial position to the factory set position, consult with your authorized Honda
snow blower dealer.
32
4.Operate the auger housing control switch
to set the auger housing in position you
want.
5.Push the auger clutch switch. The reset
switch indicator goes off and the initial
position is changed.
• If the reset switch indicator does not go off
when you push the auger clutch switch,
the initial position has not been changed.
Set the auger housing in a lower position
(step 4), and then push the auger clutch
switch again.
6.Turn the engine switch to the OFF position.
• Note that you cannot operate the snow
blower without turning the engine switch
to the OFF position once.