Setting The Date/Time - Olympus EZ-M1240 Instruction Manual

Setting the date/time

Date and time information is recorded on the card together with the images. The fi le
name is also included with the date and time information. Be sure to set the correct
date and time before using the camera. Some functions cannot be used if the date and
time have not been set.
1
Display the menus.
• Press the MENU button to display the menus.
MENU button
2
Select [X] in the [d] (setup) tab.
• Use FG on the arrow pad to select [d]
and press I.
• Select [X] and press I.
3
Set the date, time, and date format.
• Use HI to select items.
• Use FG to change the selected item.
4
Select [W] (changing the display
language) in the [d] (setup) tab.
• You can change the language used for
the on-screen display and error messages
from English to another language.
5
Save settings and exit.
• Press the Q button to set the camera clock and exit to the menu.
• Press the MENU button to exit the menus.
• If the battery is removed from the camera and the camera is left for a while, the date and
time may be reset to the factory default setting.
Shooting Menu 1
100
%
Reset / Custom Modes
1
Picture Mode
2
Image Aspect
Digital Tele-converter
j /Y /
Back
Setup Menu
100
%
Card Setup
1
2
W
Rec View
Wi-Fi Settings
[d] tab
Firmware
Back
100
%
Y M D
2017
Cancel
The time is displayed
using a 24-hour clock.
4:3
Off
Set
--.--.-- --:--:--
English
j±0 k±0
0.5 sec
Set
X
Time
Y M D / /
EN 19
1