Adjusting I-Enhance Effects (Effect); Setting The Color Reproduction Format (Color Space) - Olympus EZ-M1240 Instruction Manual

Adjusting i-Enhance effects ( Effect)
You can set the i-Enhance effect strength in picture mode (P. 61).
1 Press the Q button to display the LV super control
panel.
2
Use FGHI to select [Effect].
3
Use the front dial to select an option.
r (Effect: Low)
s (Effect: Standard)
t (Effect: High)
Setting the color reproduction format ( Color Space)
You can select a format to ensure that colors are correctly reproduced when shot
images are regenerated on a monitor or using a printer. This option is equivalent to the
[Color Space] (P. 119) in Custom Menu.
1
Press the Q button to display the LV super control
panel.
2
Use FGHI to select [Color Space].
3
Use the front dial to select an option.
sRGB
AdobeRGB
• [AdobeRGB] is not available in movie mode or with ART (P. 33) or HDR
Adds a low i-Enhance effect to images.
Adds an i-Enhance effect between "low" and "high" to images.
Adds a high i-Enhance effect to images.
This is the RGB color space standard stipulated by the International
Electrotechnical Commission (IEC).
Normally, use [sRGB] as the standard setting.
This is a standard provided by Adobe Systems.
Compatible software and hardware such as a display, printer etc.
are required for a correct output of images.
Effect
100
%
Effect
A + 1 i-Enhance
ISO WB
Auto Auto
G + 1 S +1
S-AF
+0.8
Standard
S-IS Auto H sRGB
M-IS Auto F + RAW
FullHD
F
250 F5.6 250 0.0 0.0
100
%
Color Space
A + 1 Natural
ISO WB
Auto Auto
G + 1 S +1
S-AF
+0.8
S-IS Auto H sRGB
M-IS Auto F + RAW
FullHD
F
250 250 F5.6 0.0 0.0
Color Space
2
+1
Normal
1:02:03 1:02:03
1023 1023
+1
Normal
1:02:03 1:02:03
1023 1023
EN 65