Setting The Date/Time - Olympus E-M10 Mark III Instruction Manual

Setting the date/time

Date and time information is recorded on the card together with the images. The fi le
name is also included with the date and time information. Be sure to set the correct
date and time before using the camera. Some functions cannot be used if the date and
time have not been set.
1
Display the menus.
• Press the MENU button to display the menus.
• A guide is displayed in 2 seconds after you select an option.
• Press the INFO button to view or hide guides.
MENU button
2
Select [X] in the [d] (setup) tab.
• Use FG on the arrow pad to select [d]
and press I.
• Select [X] and press I.
3
Set the date, time, and date format.
• Use HI to select items.
• Use FG to change the selected item.
• Press the Q button to set the camera
clock.
4
Select [W] (changing the display
language) in the [d] (setup) tab.
• You can change the language used for
the on-screen display and error messages
from English to another language.
• Use FGHI to highlight a language and press the Q button to select the
highlighted language.
Press the MENU button to exit the menus.
5
• If the battery is removed from the camera and the camera is left for a while, the date and
time may be reset to the factory default setting.
Shooting Menu 1
1 Reset
1
Picture Mode
2
Digital Tele-converter
Metering
Back
Setup Menu
Card Setup
1
X
2
W
s
Rec View
Wi-Fi Settings
[d] tab
Firmware
Back
Y M D
2017
Cancel
The time is displayed using
a 24-hour clock.
Off
p
Set
'--.--.-- --:--:--
English
j±0 k±0
0.5 sec
Set
X
Time
Y/M/D
19
EN
1