Olympus EZ-M1240 Instruction Manual page 69

AF Limiter
Preset MF
s Lens (Lens Info
Settings)
IS Mode
# (Flash Mode)
j/Y
G (Switch G Lock)
Electronic Zoom
• To use [ 8 Function] and [ u Function] options, you will fi rst have to select [Direct
Function] for [ u Function].
• To use [w Function] and [x Function] options, you will fi rst have to select [Direct
Function] for [v Function].
• The [Direct Function] option for u button applies to each of FGHI.
• Assign N to the u button to use it for AF target selection.
• The l button can be used for the functions available on some lenses.
• The multi-function button can be assigned the following roles:
b (Highlight&Shadow Control), c (Color Creator), e (ISO/WB), f (WB/ISO),
U (Magnify), d (Image Aspect), n (S-OVF), 2 (Peaking)
Press the button to turn on and off the AF Limiter. You
can switch the AF Limiter mode by rotating the dial while
pressing the button.
Press the button to switch to Preset MF. Press the button
again to return to the original AF setting. You can switch
the focusing mode by rotating the dial while pressing the
button.
Press the button to display the lens information settings
menu (P. 132).
Press the button to turn on and off the image stabilization.
You can switch the image stabilization mode by rotating the
dial while pressing the button.
Press the button to choose a fl ash mode.
You must fi rst set [u Function] to [Direct Function].
Press the button to choose a sequential shooting or self-
timer option.
You must fi rst set [u Function] to [Direct Function].
Press and hold the button to enable and disable touch
screen operation.
You must fi rst set [u Function] to [Direct Function].
When using a lens with a power zoom function, after
pressing the button, use the arrow pad for zooming
operations.
You must fi rst set [u Function] to [Direct Function].
2
EN 69