Shooting "My Clips - Olympus EZ-M1240 Instruction Manual

Shooting " My Clips"
You can create a single My Clips movie fi le including multiple short movies (clips). You
can also add still pictures to the My Clips movie.
 Shooting

2
1
Set the mode dial to n.
2
Press the Q button to display the LV super control panel.
3
Use FGHI to select [nK].
FHD
4
Select
• Press the INFO button to change [Movie Resolution], [Bit Rate], [Frame Rate], and
[Clip Recording Time]. Highlight [Movie Resolution], [Bit Rate], [Frame Rate], or [Clip
Recording Time] using HI and use FG to change.
5
Press the R button to start shooting.
• The recording ends automatically when the preset shooting time has elapsed, and
a screen for checking the recorded movie is displayed. Press the Q button to start
shooting the next one.
• If you press the R button again during shooting, the shooting will continue while the
button is held down (up to a maximum of 16 seconds).
6
Press the R button to shoot the next clip.
• The confi rmation screen will disappear and shooting of the next clip will start.
• To delete the clip you have shot or save it in a different My Clips, perform the
following on the confi rmation screen.
F
G

• The shooting of the next clip can be started by pressing the shutter button halfway.
The clip is saved in the same My Clips as the previous clip.
• Clips with different [Movie Resolution], bit rate, and [Frame Rate] settings are saved
as separate My Clips.
72 EN
F
using the front dial and press the Q button.
30
Plays back My Clips from the beginning.
Changes My Clips to save the clip to and the position to add the clip
to. Use HI to change the position to add the clip to in the My Clips.
Deletes the shot clip.
100
%
n
A + 1 Natural
ISO WB
Auto Auto
G + 1 S +1
S-AF
+0.8
o
S-IS Auto sRGB
M-IS Auto F + RAW
FullHD
F
250 250 F5.6 0.0 0.0
+1
Normal
1:02:03 1:02:03
1023 1023