Table of Contents
Advertisement
3.1.12 MOTION: ON / OFF selectable.
MOTION DET: ON
DETECT SENSE
BLOCK DISP
MONITOR AREA
AREA SEL
TOP
BOTTOM
LEFT
RIGHT
DETECT SENSE:
BLOCK DISP:
MONITOR AREA:
AREA SEL:
TOP:
BOTTOM:
LEFT:
RIGHT:
3.1.13 CAMERA ID: ON / OFF selectable.
A B C D E F G H I J K L M N O P Q R S T U V
W X Y Z 0 1 2 3 4 5 6 7 8 9 - ! " # $ % & '
( ) _ , ￥ ： ； < = > ? @ \ ^ * . x + /
← → ↑ ↓
CLR
000~127
ON / OFF / ENABLE
ON / OFF
1~4
000~244 (NTSC) / 000~288(PAL)
000~244 (NTSC) / 000~288(PAL)
540TVL：000~378 (NTSC)、000~370 (PAL)
650TVL：000~474 (NTSC)、000~468 (PAL)
540TVL：000~378 (NTSC)、000~370 (PAL)
650TVL：000~474 (NTSC)、000~468 (PAL)
Set the motion detection sensitivity.
Control the ON/ OFF status of the motion detection block
display.
Set whether to use the monitoring frames.
Select the monitoring frame to be set.
Set the top side of the monitoring frame selected
Set the bottom side of the monitoring frame selected
Set the left side of the monitoring frame selected
Set the right side of the monitoring frame selected
18
Each User Font
The camera ID cursor moves in the direction
of the arrow when the Enter operation input is
performed from the status in which ←, →, ↑
or ↓ has been selected using the character
selection cursor.
The character selected by the camera ID
cursor is cleared when the Enter operation
input is performed from the status in which
CLR has been selected using the character
selection cursor.
Advertisement
Table of Contents
