Two Men Operation Mode; To Check The Number Of Events - Samsung SSA-S2101 User Manual

Standalone rfid access controller
Hide thumbs Also See for SSA-S2101:
Table of Contents

Advertisement

TWO MEN OPERATION MODE

With TWO MEN MODE active, the door will be opened if both administrator card and visitor card are entered in a row
within 10 seconds.
F 3
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
press
ENT
.
4
3.
Use the buttons
USE : TWO MEN MODE is enabled.
NOT USE : TWO MEN MODE is disabled.
M
To enable this function, the preferred administrator card should be assigned code 1, while the visitor card be
assigned code 2. (See Page 31 for "Registering the ID ".)

TO CHECK THE NUMBER OF EVENTS

You can check the total number of events stored in the memory. When an event is stored in the memory, the count will
increase accordingly.
The total number of events is 20,000.
Once a specifi c event is uploaded successfully to the host PC, it will be removed from the internal memory.
F 7
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
3.
The number of events stored in the memory will be shown.
M
To remove the event, refer to "To delete all events". (see page 39)
The number of registered IDs will be displayed in 5 digits.
When the memory is full, please refer to "Event Memory Setup". (see page 57)
6
and
to move to the TWO MEN MODE item and
6
and
to select USE or NOT USE, and press
6
and
to move to the EVENT COUNT item.
3.TWO MEN MODE
NOT USE
.
ENT
3.TWO MEN MODE
USE
6.EVENT COUNT
00014
English35

Advertisement

Table of Contents
loading

Table of Contents