Table of Contents
Advertisement
initialization
To register a master card PIN
1.
Press the
SETUP MENU button.
F 7
4
2.
Use the buttons
press
ENT
.
3.
Select a master ID index to register and press
4.
To select a PIN, press
5.
Enter the PIN for the master card to register and press
•
PIN Range
- SSA-S2100 : Numeric letters in 8 digits
Ranges from 00000001 to 99999999
- SSA-S2101 : Numeric letters in 10 digits
Ranges from 0000000001 to 4294967295
NAME DISPLAY
With "Name Display", you can set to display the name of a user who enters.
The user name can be downloaded by using the provided application software only, and accepts only alphabetic
letters up to 8 characters. By using the unit, you can register a new user but cannot enter the user's name. In case of
such a user's accessing, no name will be displayed.
1.
Press the
F 3
SETUP MENU button.
4
2.
Use the buttons
press
ENT
.
4
3.
Use the buttons
•
USE : Name Display is enabled.
NOT USE : Name Display is disabled.
4.
When done, press
ENT
M
If you set Name Display to "USE", the maximum number of IDs will be limited to 10000.
Make sure no ID should have ever be registered before using this function.
22_
Initialization
6
and
to move to the MASTER ID REG item and
.
ENT
2
.
6
and
to move to the NAME DISPLAY item and
6
and
to select USE or NOT USE, and press
to save your settings.
4. MASTER ID REG
4. MASTER ID REG
ENT
.
4. MASTER ID REG
4. MASTER ID REG
ENTER PIN
PIN:_
6. NAME DISPLAY
.
ENT
6. NAME DISPLAY
00/00
MASTER #1
EMPTY
1:CARD, 2:PIN
NOT USE
NOT USE
Advertisement
Table of Contents
