Duress Mode Output Setup; Arm/Disarm Output Setup - Samsung SSA-S2101 User Manual

Standalone rfid access controller
Hide thumbs Also See for SSA-S2101:
Table of Contents

Advertisement

I/O time setup

DURESS MODE OUTPUT SETUP

You can specify the output time for Duress mode.
1.
Press the
F 5
SETUP MENU button.
4
2.
Use the buttons
press
.
ENT
3.
You can make input when the prompt blinks.
Use the keypad to enter the time for each output operation and press
DR : Door relay output
AR : Alarm relay output
T1 : TTL #1 output
T2 : TTL #2 output
BZ : Buzzer output
M
Duress Alarm must be enabled (See Page 36 for "Duress Mode".)
The output time differs, depending on the time unit.
If the time unit is 0.1 (second), you can specify the value between 0.0 and 9.8 second; if set to 1 (second), you can
specify between 0 and 98 seconds.
For the time unit, refer to the 'Time Unit Setup' under the advanced setup. (see page 50)
If you enter 99 for the value, the product stays in output mode until you change the setting regardless of the time
unit.

ARM/DISARM OUTPUT SETUP

You can specify the output time for ARM/DISARM mode.
F 5
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
and press
.
ENT
3.
You can make input when the prompt blinks.
Use the keypad to enter the time for each output operation and press
DR : Door relay output
AR : Alarm relay output
T1 : TTL #1 output
T2 : TTL #2 output
BZ : Buzzer output
M
ARM/DISARM must be enabled. (See Page 37 for "Arm/Disarm".)
The output time differs, depending on the time unit.
If the time unit is 0.1 (second), you can specify the value between 0.0 and 9.8 second; if set to 1 (second), you can
specify between 0 and 98 seconds.
For the time unit, refer to the 'Time Unit Setup' under the advanced setup. (see page 50)
If you enter 99 for the value, the product stays in output mode until you change the setting regardless of the time
unit.
40_
I/O Time Setup
6
and
to move to the DURESS ALARM item and
6
and
to move to the ARM/DISARM SET item
7.DURESS ALARM
D R A R T 1 T 2 B Z
0 0 0 0 0 0 0 0 0 0
.
ENT
7.DURESS ALARM
D R A R T 1 T 2 B Z
_ 0 0 0 0 0 0 0 0 0
8.ARM/DISARM OUT
D R A R T 1 T 2 B Z
0 0 0 0 0 0 0 0 0 0
ENT
.
8.ARM/DISARM OUT
D R A R T 1 T 2 B Z
_ 0 0 0 0 0 0 0 0 0

Advertisement

Table of Contents
loading

Table of Contents