Table of Contents
Advertisement
BAUD RATE SETUP
This product supports 9600, 19200, 38400, and 57600 bps, and it is set to 57600 bps by default.
An improper speed setting can cause a communication error so ensure that you specify the same speed in the same
network.
F 1
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
.
ENT
4
3.
Use the buttons
•
9600
19200
38400
57600
4.
When done, press
ENT
M
If you encounter a problem with the communication, check the followings fi rst.
- Check the communication addresses for this product and the host PC
(software).
- Check the baud rate settings of each of the host PC and this product.
- Check the communication port and cable.
- Check the host PC for the port settings.
FACTORY DEFAULTS
All menu settings will return to the factory default. (The memory is not deleted.)
F 8
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
.
ENT
1
3.
Press the button
•
To cancel the resetting, press the button
6
and
to move to the BAUD RATE item and press
6
and
to select a serial communication speed.
to save your settings.
6
and
to move to the DEFAULT SET item and press
to restore the menu settings to the default.
0
.
8. BAUD RATE
57600
8. BAUD RATE
19200
8. BAUD RATE
19200
6. DEFAULT SET
6. DEFAULT SET
1:YES, 0:NO
English25
Advertisement
Table of Contents
