Table of Contents
Advertisement
additional features
EVENT MEMORY SETUP
1.
Press the
F 2
SETUP MENU button.
4
2.
Use the buttons
.
ENT
4
3.
Use the buttons
.
ENT
•
USE : When the event memory is full, it gives out an error message and
maintains all events stored in the memory.
NOT USE : Even when the event memory is full, it does not give out
an error message. In this case the last event saved in the
memory is replaced with the next new one. Select 'NOT
USE' for standalone use (only for entry access exclusively).
M
The default setting is "USE".
ID DISPLAY
F 2
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
ENT
.
4
3.
Use the buttons
and press
.
ENT
•
MESSAGE : Instead of a text message and the user ID, the text message
of "********" will appear on the screen.
ID + MESSAGE : The User ID along with a text message will appear on the
screen.
<MESSAGE>
ACCESS GRANTED!
MYID
12/12 16:25 :07
•
The "MYID" in the picture is a user name which will be displayed if the ID and name were registered using the
provided application software. (See Page 25 for "Name Display".)
54_
Additional Features
6
and
to move to EVENT MEMORY and press
6
and
to select either USE or NOT USE and press
6
and
to move to the ID DISPLAY item and press
6
and
to select MESSAGE or ID + MESSAGE
<ID + MESSAGE>
12345678
ACCESS GRANTED!
MYID
12/12 16:25 :07
1.EVENT MEMORY
NOT USE
1.EVENT MEMORY
NOT USE
1.EVENT MEMORY
USE
2. ID DISPLAY
MESSAGE
2.ID DISPLAY
MESSAGE
2.ID DISPLAY
ID + MESSAGE
Advertisement
Table of Contents
