Table of Contents
Advertisement
reader mode setup
READER #1 MODE
READER#1 is the default reader that is built in this product.
1.
Press the
F 1
SETUP MENU button.
4
2.
Use the buttons
press
.
ENT
4
3.
Use the buttons
2 modes are available for your choice.
•
ID ONLY : In this mode, you can get access only with the proximity card
or ID number.
ID+P/W : If configured with this mode, access is granted only when the
password is entered after reading the card or entering the ID
number.
4.
When done, press
ENT
READER #2 MODE
READER#2 is an external reader for exit.
F 1
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
press
.
ENT
4
3.
Use the buttons
2 modes are available for your choice.
•
ID ONLY : In this mode, you can get access only with the proximity card
or ID number.
ID+P/W : In this mode, you can get access through the password
authentication after using the proximity card or entering the ID
number.
4.
When done, press
ENT
26_
Reader Mode Setup
6
and
to move to the READER#1 MODE item and
6
and
to select a reader mode.
to save your settings.
6
and
to move to the READER#2 MODE item and
6
and
to select a reader mode.
to save your settings.
3. READER#1 MODE
ID ONLY
3. READER#1 MODE
ID+P/W
3. READER#1 MODE
ID+P/W
4. READER#2 MODE
ID ONLY
4. READER#2 MODE
ID+P/W
4. READER#2 MODE
ID+P/W
Advertisement
Table of Contents
