Table of Contents
Advertisement
NOTE: The software upgrade will last up to 5 minutes (through the LAN side) and may take longer when
upgrading through the Internet (limited by the network bandwidth). Grandstream recommends
downloading and upgrading the software in a controlled LAN environment.
NO LOCAL TFTP SERVERS
For users without a local TFTP server, Grandstream offers a NAT-friendly TFTP server. This enables users
to download the latest software upgrades for their phone via this server. Please refer to the webpage:
http://www.grandstream.com/firmware.html.
Alternatively, users can download a free TFTP or HTTP server and conduct a local firmware upgrade. A
free windows version TFTP server is available for download from
http://support.solarwinds.net/updates/New-customerFree.cfm
or http://tftpd32.jounin.net/.
Instructions for local firmware upgrade:
1. Unzip the firmware files and put all of them in the root directory of the TFTP server.
2. Connect the PC running the TFTP server and the GXV3175 device to the same LAN segment.
3. Launch the TFTP server and go to the File menu -> Configure -> Security to change the TFTP server's
default setting from "Receive Only" to "Transmit Only" for the firmware upgrade.
4. Start the TFTP server and configure the TFTP server in the phone's web configuration interface.
5. Configure the Firmware Server Path to the IP address of the PC.
6. Update the changes and reboot the GXV3175.
End users can also choose to download a free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS web server.
RESTORE FACTORY DEFAULT SETTINGS
WARNING:
Restoring the Factory Default Settings will delete all configuration information on the phone.
Please backup or print all the settings before you restore to the factory default settings. Grandstream is not
responsible for restoring lost parameters and cannot connect your device to your VoIP service provider.
There are two methods to restore the GXV3175 to the factory default settings.
RESTORE TO FACTORY DEFAULT SETTINGS VIA LCD MENU
The steps to restore the phone to factory default settings through the LCD menu are as follows:
Step 1: Select MENU to access the phone menu and select System Settings.
GXV3175 USER MANUAL
Page 57 of 60
Grandstream Networks, Inc.
Updated : 3/2012
FIRMWARE VERSION 1.0.1.1
Advertisement
Table of Contents
