Sip Account Configuration Page Definitions - Grandstream Networks GXV3175-T User Manual

Ip multimedia phone
Table of Contents

Advertisement

Exposure Setting
Color Mode
White Balance
Lens Correction
Flicker Control
Maintenance/Device Manager (TV Port)
TV Output

SIP ACCOUNT CONFIGURATION PAGE DEFINITIONS

The GXV3175 has three lines that can be configured to accommodate independent SIP accounts. Every
SIP account has an individual configuration page.
Account/General Settings
Account Active
Account Name
SIP Server
SIP User ID
Authenticate ID
Authenticate password
Voice Mail User ID
Grandstream Networks, Inc.
Select the desired Camera Exposure mode based on the surroundings. The
default setting is set to Auto. The default setting is 8.
Select the desired Camera Color Mode (Color or Monochromatic). The
default setting is set to Color.
Select the desired Camera White Balance to be automatic or Fixed. The
default setting is set to Auto.
Correct Camera Lens noise. The default setting is set to YES.
It is recommended to set this parameter to YES to reduce camera lens noise
and improve video quality.
Reduces flicker of image shot with a video camera caused by luminance
fluctuation of an illuminating light source. Users can select 50Hz/60Hz
depending on the frequency of the commercial electrical power.
The default setting is set to Auto.
Select the desired TV Output type (PAL or NTSC). NTSC 4:3 by default.
Select YES to enable and use the Line.
The account name for the user that is displayed on the LCD screen.
The IP address of the SIP server or the given domain name of the VoIP
service provider.
User account information provided by the VoIP service provider; normally
similar to a telephone number or an actual telephone number.
The authenticate ID for the SIP user. It can differ or be the same as the SIP
user ID.
The password that the GXV uses to authenticate with the ITSP (SIP) server.
After it is saved, this will appear as blank for security reasons. The
maximum length is 25 characters.
When this is configured, the user can dial to the voicemail server using the
MESSAGE button. This ID is normally the feature code for Voice Mail.
GXV3175 USER MANUAL
FIRMWARE VERSION 1.0.1.1
Page 47 of 60
Updated : 3/2012

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gxv3175-pGxv3175 v2

Table of Contents