Grandstream Networks GXV3175-T User Manual page 44

Automatic Upgrade
Period time of upgrade
checking
Hour of the day (0-23)
Day of the week (0-6)
Automatic Upgrade Rule
Authenticate Conf File
Factory Reset
Maintenance/Syslog
Syslog Server
Syslog Level
Maintenance/Debug
Grandstream Networks, Inc.
The default value is NO. Choose "YES" to enable automatic HTTP upgrade
and provisioning.
Specifies the time period to check for firmware upgrade. The default setting
is 10080 minutes ( 7 days)
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes.
Defines the day of the week to check the HTTP/TFTP server for firmware
upgrades or configuration files changes.
Defines the rules for automatic upgrade: Always Check, when F/W
suffix/prefix changes, Skip the Firmware Check.
Authenticate configuration file before acceptance. The Default setting is NO.
Restore to factory default settings. Users can choose from: Full Reset, VoIP
Data Reset, and User Data Reset. After the selection is made, press the
"Reset" button to factory reset the phone.
NOTE: Users can use the backup/restore functionality of the phone prior to
the factory reset.
The URL/IP address for the syslog server.
Select the level of logging for syslog. The default setting is NONE.
There are 4 levels: INFO, DEBUG, ERROR and WARNING.
Syslog messages are sent based on the following events:
Product model/version on boot up (INFO level)
NAT related info (INFO level)
Sent or received SIP message (DEBUG level)
SIP message summary (INFO level)
Inbound and outbound calls (INFO level)
Registration status change (INFO level)
Negotiated codec (INFO level)
Ethernet link up (INFO level)
SLIC chip exception (WARNING and ERROR levels)
Memory exception (ERROR level).
GXV3175 USER MANUAL
FIRMWARE VERSION 1.0.1.1
Page 44 of 60
Updated : 3/2012