No Local Tftp/Http Servers; Configuration File Download - Grandstream Networks GXP1610 Administration Manual

Firmware upgrading takes around 60 seconds in a controlled LAN or 5-10 minutes over the Internet. We
recommend completing firmware upgrades in a controlled LAN environment whenever possible.
Note:
Please do not interrupt or power cycle the GXP1610/GXP1620/GXP1625/GXP1628/GXP1630 during
upgrading process.

NO LOCAL TFTP/HTTP SERVERS

For users that would like to use remote upgrading without a local TFTP/HTTP server, Grandstream offers
a NAT-friendly HTTP server. This enables users to download the latest software upgrades for their phone
via this server. Please refer to the webpage:
http://www.grandstream.com/support/firmware.
Alternatively, users can download a free TFTP or HTTP server and conduct a local firmware upgrade. A
free windows version TFTP server is available for download from :
http://support.solarwinds.net/updates/New-customerFree.cfm
http://tftpd32.jounin.net/.
Instructions for local firmware upgrade via TFTP:
Unzip the firmware files and put all of them in the root directory of the TFTP server;
1.
Connect the PC running the TFTP server and the phone to the same LAN segment;
2.
Launch the TFTP server and go to the File menu->Configure->Security to change the TFTP server's
3.
default setting from "Receive Only" to "Transmit Only" for the firmware upgrade;
Start the TFTP server and configure the TFTP server in the phone's web configuration interface;
4.
Configure the Firmware Server Path to the IP address of the PC;
5.
Update the changes and reboot the phone.
6.
End users can also choose to download a free HTTP server from
IIS web server.

CONFIGURATION FILE DOWNLOAD

Grandstream SIP Devices can be configured via the Web Interface as well as via a Configuration File
(binary or XML) through TFTP or HTTP/HTTPS. The "Config Server Path" is the TFTP or HTTP/HTTPS
server path for the configuration file. It needs to be set to a valid URL, either in FQDN or IP address format.
The "Config Server Path" can be the same or different from the "Firmware Server Path".
GXP1610/GXP1620/GXP1625/GXP1628/
GXP1630 Administration Guide
.
http://httpd.apache.org/ or use Microsoft
Page 47 of 52