Grandstream Networks GXV3175-T User Manual page 53

Early Dial
Refer to Use Target
Contact
Auto Answer
Send Anonymous
Anonymous Call Rejection
Call Log
Special Feature
Feature Key Sync
Enable Call Features
Call Forward
Unconditional
Call Forward When Busy
Call Forward When No
Answer
Delayed Call Forward
Wait Time (s)
No Key Entry Timeout (s)
Ring Timeout (s)
Transfer on Conference
Grandstream Networks, Inc.
numbers.
The default setting is NO. Use only if the proxy supports 484 response.
The default is NO. If set to YES, then for Attended Transfer, the "Refer-To"
header uses the transferred target's contact header information.
The default setting is NO. If it is set to YES, the GXV3175 will play a "beep"
sound and answer the phone automatically on the speaker.
If set to YES, the "From" header in the outgoing SIP messages will be set to
anonymous to block the caller ID from displaying. The default setting is NO.
The default setting is NO； If set to YES， any anonymous call will be rejected
（with 486 Busy message）
Options to log calls are Log All, Log Incoming/Outgoing Only(missed calls
will not be recorded), Disable All
Different soft switch vendors have special requirements; therefore users
may need to select special features to meet these requirements. Users can
choose from Standard, CBCOM, RNK, China Mobile, ZTE IMS and Mobotix
depending on their need.
The default setting is Standard.
Default is "No". This option is to synchronize DND/Call Forward features
with Broadsoft. When set to "Yes", a SUBSCRIBE will be sent out
periodically to the server. Then when DND/Call Forward features Call
Forward No Answer, Unconditional Call Forward and Call Forward on Busy)
are configured or changed on the phone and the Broadsoft server side,
those features will be synchronized on the phone side and the Broadsoft
server side.
The default is set to YES. If it is set to NO, call features are disabled.
Sets the number to forward to unconditionally.
Sets the number to forward to when busy.
Sets the number to forward to when no answer.
The wait time before transferring the call to another extension or to
voicemail; the default setting is 20 seconds.
Defines the time out duration on no key entry.
Default setting is 4 seconds.
Defines the time out duration on no answer.
Default setting is 60 second.
Defines whether or not the call is transferred to the other party if the initiator
GXV3175 USER MANUAL
FIRMWARE VERSION 1.0.1.1
Page 53 of 60
Updated : 3/2012