Operation
Fig. 8-3: Connecting actuator and memory pen
The yellow LED on the actuator indicates that the data logging is being prepared. Data
transmission is completed when the yellow LED is illuminated continuously (see the 'Opera-
tion' section).
8.4.1
Copying function
The memory pen can be used to copy setting data to other Types 5827 Actuators after the
data from the actuator have been transferred to the memory pen.
Note
"Automatically write to memory pen" is automatically reset to the read status after data are
transferred from the actuator for the first time.
8-6
1
2
1
Memory pen
2
Serial interface
(RJ12 jack)
EB 5827-2 EN