Samson 5827 Mounting And Operating Instructions page 73

Declaration of incorporation
Declaration of Incorporation in Compliance with Machinery Directive 2006/42/EC
For the following product:
Type 5827 Actuator
We certify that the Types 5824 and 5825 Electric Actuators are partly completed machinery
as defined in the Machinery Directive 2006/42/EC and that the safety requirements stipulated
in Annex I, 1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7,
1.3.8.2, 1.3.9, 1.4.1, 1.5.1, 1.5.3, 1.5.4 and 1.5.8 are observed. The relevant technical
documentation described in Annex VII, part B has been compiled.
Products we supply must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of the Machinery Directive
2006/42/EC.
Operators are obliged to install the products observing the accepted industry codes and
practices (good engineering practice) as well as the mounting and operating instructions.
Operators must take appropriate precautions to prevent hazards that could be caused by the
process medium and operating pressure in the valve as well as by the signal pressure and
moving parts.
The permissible limits of application and mounting instructions for the products are specified
in the associated mounting and operating instructions; the documents are available in
electronic form on the Internet at www.samsongroup.com.
For product descriptions refer to:
-
Referenced technical standards and/or specifications:
-
-
Comments:
-
-
Persons authorized to compile the technical file:
SAMSON AG, Weismüllerstraße 3, 60314 Frankfurt am Main, Germany
Frankfurt am Main, 21 February 2021
Stephan Giesen
Director
Product Management
Classification: Public · SAMSON AKTIENGESELLSCHAFT · Weismüllerstraße 3 · 60314 Frankfurt am Main, Germany
EB 5827-2 EN
Type 5827 Electric Actuator: Mounting and Operating Instructions EB 5827-1 / EB 5827-2
VCI, VDMA, VGB: "Leitfaden Maschinenrichtlinie (2006/42/EG) – Bedeutung für Armaturen, Mai 2018"
[German only]
VCI, VDMA, VGB: "Zusatzdokument zum Leitfaden Maschinenrichtlinie (2006/42/EG) – Bedeutung für
Armaturen vom Mai 2018" [German only], based on DIN EN ISO 12100:2011-03
See mounting and operating instructions for residual hazards.
Also observe the referenced documents listed in the mounting and operating instructions.
Sebastian Krause
Director
Strategic R&D, Valves and Actuators
Certificates
Revision no. 02
Page 1 of 1
15-5