Table of Contents
Advertisement
Placing the Line Unit in Service Using an HXU-358 Multiplexer
Step
Procedure
The following procedure assumes proper TAO login.
For proper login procedure, please refer to
page
27.
1
From the Shelf Options screen, select
2
Select the Config menu and then press
3
Select the T1/E1 Ports menu and then press
4
Select the Port #, use the
5
Press
ESC
to return the Shelf Status menu.
6
Proceed to
"Enabling Alarms for Systems Using an HXU-358 Multiplexer" on page
? ? ? ?
Installer Signature
Once a line is placed In Service under the HXU Configuration Management menu, its provisioning
cannot be changed. To reprovision a line, place it in maintenance mode (Unequipped and
Out-of-Service). This does not affect changing DS1 parameters under the HLU Maintenance
Terminal menu.
62
M
.
ENTER
.
ENTER
.
SPACEBAR
to select IN-SRVC, and then press
September 29, 2000
800-357-104-01, Revision 01
"Using the Terminal Access Option" on
ENTER
.
63.
Installer Check ü ü ü ü
H
H
H
H
H
H
Date
HMS-357 List 4 and List 5
Advertisement
Table of Contents
