Inspections And Maintenance By Dealer - Stihl FS 94 R Instruction Manual

English
arresting screen damaged. Do not
modify the muffler or spark arresting
screen.
NOTICE
According to the law or regulations in
some countries or federal states, certain
operations may only be carried out if a
properly serviced spark arresting screen
is provided.
If the engine is down on power, check
the spark arresting screen in the muffler.
Wait for the muffler to cool down
N
1
2
Undo screw (1)
N
Lift the spark arresting screen (2)
N
and pull it out.
Clean the spark arresting screen. If
N
the screen is damaged or heavily
carbonized, fit a new one
Refit the spark arresting screen
N
Insert and tighten the screw
N
30
Inspections and Maintenance
by Dealer
Maintenance work
STIHL recommends that all
maintenance and repairs be carried out
by STIHL dealers.
Fuel pickup body in tank
Check the pickup bodies in the fuel
N
tank annually and have them
replaced when necessary
The pickup bodies should be located in
the tank in the areas shown in the figure.
Spacer, shim
WARNING
To reduce the risk of damage to persons
or objects from contact with hot parts,
never operate the machine without a
spacer, or with the spacer damaged.
The spacer (arrow) is integrally molded
to the cover.
Check the spacer (1) for damage.
N
If the spacer (1) is damaged, have
N
the cover replaced immediately.
Antivibration element
A vibration-absorbing rubber element is
installed between the powerhead and
the shaft. Have it checked in the event of
noticeable wear or constantly increased
vibration.
FS 94 R