Inspections And Maintenance By Dealer; Maintenance And Care - Stihl KA 120 Instruction Manual

18 Inspections and Maintenance by Dealer

18 Inspections and Mainte‐
nance by Dealer
18.1 Maintenance Work
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer.
18.2 Antivibration Element

19 Maintenance and Care

The following intervals apply for normal operating
conditions. The specified intervals must be short‐
ened accordingly when working for longer than nor‐
mal or under difficult cutting conditions (extensive
dust, etc.).
Complete machine
Control handle
Air filter
Manual fuel pump
Fuel pickup body in fuel
tank
Fuel tank
Carburetor
Spark plug
0458-516-0121-B
Visual inspection (condi‐
tion, leaks)
Clean
Function test
Clean
replace
check
Have repaired by a spe‐
1)
cialist dealer
check
replace
Clean
Check idle adjustment –
the attachment must not
move
Set idle speed
Adjust electrode gap
A vibration-absorbing rubber element is installed
between the powerhead and the drive tube.
Have it checked if there are signs of wear or a
noticeable increase in vibration levels.
X X
X
X X
X
X X
English
X X
X
X
X
X X X
X X
X
X
19