Table of Contents
Advertisement
Process view button row ver. 2
5.7 Control settings
Control settings
The Control settings view allows you to toggle between different modes and specify
setpoints. The view can be accessed from the Process view. An active selection is
indicated in green.
To change a setpoint, tap on the setpoint value.
Pos.
1
Start difference and stop
difference
2
Primary control mode selection
3
Setpoint control method
46 (64)
Item
These values specify how much the temperature must
exceed or fall below the setpoint before the unit will be
started or stopped (for example, when heating is no longer
required). The unit will be stopped with a delay.
Switch between two modes: Chill (snowflake button) or
Heat (sun button).
Select the method with which the setpoint is determined
(see the table below).
Description
EXEP01 2150EN
Advertisement
Table of Contents
