Press
Once
Press
Again
Press
Selects or "freezes" your low speed blending color of choice.
Again
BLUE (X4)VIOLET (X5)RED (X6) AMBER (X7)GREEN (X8) AQUA (X9)
Press
Again
9.6
jets
All SMT Turbo jets (A) offers an adjustable flow stream
angle. To adjust each jets flow stream angle, simply push
the nozzle to the left or right. The Accu-Pressure jet (B) is
non-adjustable. The Fluidix jet (C) offers adjustable flow
volume by turning the outer jet ring clockwise to increase
flow or counterclockwise to decrease flow.
Note: Always keep at least 6 adjustable jets open at all times
on each jet system.
9.7
Waterfall Operation
Turn waterfall control valve counterclockwise to increase
waterfall output. Turn control valve clockwise to decrease or
turn off waterfall output.
Note: It takes half of a revolution to change the waterfall
from a full off to a full on flow rate.
High-Speed Color Blend Mode
Low-Speed Color Blend Mode
Freeze Color Blend Mode:
Solid Color Mode:
Selects one of 7 solid (high-intensity) colors of choice.
780 SERIES
NEAR
WHITE (X10)
A
C
B
Note: jet
appearance may
vary.
180°
Full
ON
180°
Full
OFF
Page 27