Wps - TP-Link TL-WA901N User Manual

Chapter 4
•
•
•
•
•
• WEP
•
•
•
•
Note:
• If you do not set the key, the wireless security function is still disabled even if you have selected Shared
Key as Authentication Type.
4. 4. 3.
WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network.
This section will guide you to add a new wireless device to your access point's network
quickly via WPS.
Note:
• The WPS function cannot be configured if the wireless function of the access point is disabled. Please
make sure the wireless function is enabled before configuration.
• When working in Client mode, the WPS funcion of the access point is disabled.
Downloaded from ManualsNet.com
Encryption - You can select either Automatic, TKIP or AES.
Radius Server IP - Enter the IP address of the Radius Server.
Radius Port - Enter the port used by radius service.
Radius password - Enter the password for the Radius Server.
Group Key Update Period
The value can be either 0 or at least 30. Enter 0 to disable the update.
- Select 802.11 WEP security.
Type - You can select one of following types.
• Automatic - Select Shared Key or Open System authentication type automatically based on
the wireless station's capability and request.
• Shared Key - Select 802.11 Shared Key authentication type.
• Open System - Select 802.11 Open System authentication.
WEP Key Format - You can select ASCII or Hexadecimal format. ASCII format
stands for any combination of keyboard characters in the specified length.
Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f,
A-F) in the specified length.
WEP Key - Select which of the four keys will be used and enter the matching
WEP key information for your network in the selected key radio button. These
values must be identical on all wireless stations in your network.
Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
• For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not permitted) or 5 ASCII characters.
• For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not permitted) or 13 ASCII characters.
• For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not permitted) or 16 ASCII characters.

WPS

search engine
- Specify the group key update interval in seconds.
Configure the Access Point
33